Authentication RFID reader

This Standalone Proximity reader unit is a dedicated reader unit and uses 125 KHz passive cards. The unit is powered by 8-30Vdc power supply.

This unit is exclusively used for Access control purpose. A master RFID card is supplied along with the unit. Slave RFID cards can be configured using this master card by following certain procedure. On flashing the configured card, an open collector output is provided which can be used to connect a relay for further control.

The product is exclusively developed for Automotive purposes with the use of Automotive grade components, which can withstand the temperature ranges from sub-zero to 85 deg . Centigrade.



Card Standard Proximity passive card, 125 kHz
Power 8-30Vdc, Typical – 12V DC @ 300mA
Master Card 2 nos. will be provided with an unit
Employee cards Configurable up to 300 nos. max.
Output Transistor Open collector output
Output on duration   Output will turn on once a valid card shown, it will go off if the same authenticated card is shown again.
Terminations Free end wires – 1 feet length for Power and Transistor output. D9 Male Connector for RS232 output
Weight 96 gms.
Size 57w  x 92h x 26d mm
Card Size 53w x 85h x 2d mm

Write to us for more details…